Well, it’s been a couple of weeks, but I’ve made some headway on my little test squad of American troops:
Here they are basecoated and washed. For the washes I tried 5 different ones to see how I liked them, but I can say that I don’t think that how I did the zenithal highlighting had a lot of impact here. I’m going to end up priming another figure straight black and see how he comes out as a control, however, it’s not like rattle canning the additional colors took a lot of time, so I’m not really out of anything either.
For the colors on these guys, I went with Army Painter Army Green for the coats and Puttees, Vallejo Model Color (VMC) English Uniform Brown for the paints, VMC Iraqui Sand for the pack, VMC Pastel Green for the webbing and Leather Brown for the boots.
Now, a few of these colors I’ve gotten from the web, and others were kind of ‘eyeball to memory” trying to figure out colors from re-enactor’s gears and the such from Google Image results. I’m not happy with packs (too light) and the pants (just not close).
With that in mind, I decided to order some books from my local library dealing with uniforms and see if I could come up with some more accurate colors. I’m not done yet, but one book that’s just jam packed with pictures is Windrow and Hawkins’: The World War II GI, US Army Uniforms 1941-45 (https://goo.gl/vS28x8). I’ll probably do a blog post on just the uniform stuff I learn from there.
After I was done basecoating, I attacked them with a variety of washes, including some I made from Les Burley’s wash recipe (https://goo.gl/1k2JEc). I made his Soft and Heavy Body Black along with a Sepia Wash. I also used Vallejo Sepia Wash. For the Burley Sepia wash, I tried a couple of different ink concentrations: 40 and 50 drops of the FW ink.
The Vallejo Sepia Wash worked, and would probably be fine for this, but I felt like playing around. The 40 Drop concentration of Burley Sepia wash was really light. A couple of applications would probably work OK as well. However, my goal is speed, so I I’ll probably skip this. I really liked how the Soft Body Black flowed and acted, but it was too harsh of a color. Next was a 50 drop concentration of Burley’s Sepia and this was pretty good. This maybe the way I go. The last one was a bit of a mix that I, uh forgot to write down like an idiot. Of course, I like this one a lot. I think this was the fifty-drop Sepia concentration, with some black ink mixed in. I *think* I figured it would be the fifty-drop sepia with 5 or 10 drops of black ink.
So, I need to find a better color for the packs, the pants and nail down my wash. And then I’ll be able to start.
But I am getting there, and learning quite a bit as I do so, which I consider a win.
Till next time!
I, like many wargamers, am a big history buff, and I have a deep interest in the Second World War. So, when I saw Warlord’s Bolt Action at GenCon 2011 (or maybe it was ’12) I was immediately fascinated. While I had obviously seen Flames of War, the small scale (15mm) didn’t really do much for me (I already do micro-armor and BattleTech in 6mm), where as the comparatively large size of BA’s 28mm pulled at me. Much like the modeling opportunities presented by Warhammer 40K (also allegedly 28mm), I felt I could really have some fun modeling these guys.
Alas, the timing wasn’t right and it wasn’t to February that I finally took the plunge and picked up some minis to play Bolt Action. Like most of my purchases, I bought a US army force used off a friend. The infantry is a mix of Warlord plastics and Black Tree Design metals backed by a collection of Warlord resin vehicles and metal support units.
While the Black Tree sculpts look nice, proportionally they just don’t jive with the Warlord plastics. I’ll probably sell those off and use to the money towards fleshing out my force.
Anyways, as I have about a million different projects going, I’ve decided that I’m going to “speed” through these guys. I’ll never be a Golden Demon painter and I think I need to accept a certain amount of compromise on these guys to get them to the table in a reasonable amount of time. And, even when I do spend a lot of time on a model, I still find myself missing something or screwing something up. So I’ll spend my time on character models and paint up the rank-and-file to (what I hope is) a good table top standard.
To achieve this, I’m going to be trying out a couple new-to-me techniques. Including using Zenithal highlighting and ‘dips’ (though I’ll brush it on).
So to begin, I picked five random GIs, cleaned them up, based them with some sand and hot glued them to a strip of cardboard.
I then rattle-canned them Colorplace flat black all over and let them dry. The next day, I hit them with grey primer, holding the can parallel to the mini’s torso and applied thin, quick coats.
I followed this up with white, holding the can directly over the mini’s head and again, spraying in quick, thin coats.
You can see the built in highlights contrasted to the black basecoat. The question is, will this show through the coats of paint to follow?
To be continued…
So one of the side projects I’ve been working on since February has been a Vindicare Assassin from Games Workshop. Basically a super sniper with a BFG.
I thought he’d be a decent addition to my Imperial Guard army, making up for the usual lackluster hitting ability the Guard is famous for (and my abysmal dice rolling skills don’t help with). He can also ally with my future Space Marine and Sisters army’s as well.
I also decided I really wanted to paint this guy my best, so I picked up the White Dwarf that had the relative “how-to-paint” article in it, and got cracking. Though I will say I substituted some colors (especially for the base) that looked close enough. On others, such as the Dark Reaper and Kabalite Green I picked up as I had nothing even close—which is saying something with an inventory of 248 paints…
While I see room for lots of improvement, I am really happy with how he turned out. The highlights are a bit too thick, and in someplace awkwardly placed, but as this is really the first time I’ve gone in for edge highlights, I think it’s pretty good.
I’m also really happy with base. I misplaced the original (only for it to pop up a week later) so I used a correctly sized MDF one. The kit itself came with the pillar and standing platform to glue the assassin too. but that didn’t cover the whole base. I decided to glue some grit on both the platform and the base to extend and tie everything together. I also added some of my bricks in to rubble the place up a bit more. Then everything was painted and dry brushed per the directions in the White Dwarf and Boom! A pretty nice looking base, if I say so myself.